FabricIQ
Reading the label…
01Verdict
Safe to wear, but rough on the environment.
Best for Safe to wear; production isn't clean — donate when done.
Material D · 54Health C · 68Eco · 33Label · high260 gsm
Why this material grade?
This product scored 54/100 on the material-quality rubric (durability, comfort, breathability, warmth, moisture-wicking, care-ease), based on its composition of 92% Viscose, 8% Elastane. Sustainability is scored separately as the Eco Rating. Blended from 92% Rayon, 8% Spandex — the score is a weighted average based on each material's proportion.
D (40-54): Below-average material composition — weak on durability or comfort.
Below average — consider alternatives
This fabric scores low on quality. It may pill, wear out quickly, or not feel great against skin. And when it does wear out, it'll sit in a landfill for decades. Look for higher-rated options.
Budget pick
$76Below-typical fabric quality, but cheaper than the category median.
$1.41 per quality point Category median: $138 · grade C
Fabric value only — compares material quality to price vs other pants. Construction, fit, and brand aren't measured.
02Breakdown
Composition
92% Viscose, 8% Elastane
Plastic-based — sheds microplastics in wash
Fabric details
eVent™
Jersey construction · 260 g/m²
Likely chemical finishes
⚠ Easy-care resin · formaldehyde
Stated on the product page — not lab-tested. Not medical advice.
Care (from the label)
Machine wash coldTumble dry lowIron lowDo not bleachDo not dry clean
Sustainability is scored separately — see the Eco Rating below.
🌍
This fabric will take 200+ years to decompose. That means a shirt you buy today will still exist in the year 2226.
🧺
Dryer heat destroys spandex/elastane over time. Your leggings and stretchy clothes will last 2x longer if you skip the dryer.
🏭
The fashion industry produces 10% of global carbon emissions — more than aviation and shipping combined.
03Network
Performance
spec sheet- Fabric weight
- 260 g/m²
- Construction
- Jersey
Heavyweight
Knit — soft, stretchy
Cost per wear
estimated45¢/wear · 168 expected wears
Strong cost-per-wear
How we got there
Base for Pants: 200 expected wears.
× 1.20 for 260 g/m² (heavyweight).
× 0.70 for Rayon (low-durability fiber, durability 37).
= 168 expected wears. $76 ÷ 168 ≈ 45¢/wear.
Real life is messier than a formula: how often you wash, how you wash, whether you wear it inside-out, dry on low — all of it shifts the number. This is the ceiling under reasonable care.
Care Guide
Decode symbolsWash
cold (30°C)
Bleach
Do not bleach
Dry
line dry
Iron
Best For
😴Sleepwear
GoodGood comfort (77) and breathability (68) for sleeping
Better Alternatives
Higher-rated pants products — each card shows how much better this alt scores vs your current product.
04Tradeoffs
Health Impact
Microplastic shedding · skin-contact synthetic load · likely chemical treatments
C68/100
Moderate health impact — some synthetic content or possible chemical treatments. Rotate with natural-fiber alternatives where you can.
Microplastics LOW
Very low
Skin contact LOW
8% synthetic
Chemicals HIGH
Formaldehyde
- Formaldehyde (likely): "Easy-care resin" stated on the product page — observed, not inferred.
Biodegradability
Not BiodegradableMaterials will persist in the environment for decades.
What this score doesn't measure
- ×Fiber grade. Staple length, micronaire, strength. "100% cotton" could be short-staple upland or long-staple Pima — same label, very different fabric.
- ×Yarn processing. Singles count, ply (single vs two-ply), spinning method (open-end vs ring-spun vs compact), mercerization. Invisible from any label.
- ×Knit / weave structure. Single jersey vs interlock, knit tightness. A loose knit pills; a tight knit lasts.
- ×Fabric weight (GSM). One construction signal among several — and high GSM can come from loose cheap yarn just as easily as from fine tight yarn. We have it for blank manufacturers, rarely for retail.
- ×Pre-shrink processing. Sanforized cotton shrinks ~1%; non-sanforized can shrink up to 10%. Not visible from the composition tag.
- ×Construction quality. Stitch density (SPI), seam types, collar geometry, manufacturing tolerances (AQL). These often matter more than the fiber itself.
- ×Specific chemical loads. Health Impact flags "likely PFAS / possible formaldehyde" from composition × category — we don't lab-test individual SKUs.
We rate the fabric, not the garment. Composition is the floor of what you're guaranteed to be getting — most shoppers don't have that.
05Action
