FabricIQ
Reading the label…
D
53/100
01Verdict
Falls short on every axis — flimsy, synthetic-heavy, and rough on the environment.
Best for Skip if you have other options.
Material D · 53Health D · 51Eco · 32Label · highMade in Japan
Why this material grade?
This product scored 53/100 on the material-quality rubric (durability, comfort, breathability, warmth, moisture-wicking, care-ease), based on its composition of 47% Cotton, 47% Acrylic, 5% Nylon, 1% Spandex. Sustainability is scored separately as the Eco Rating. Blended from 47% Cotton, 47% Acrylic, 5% Nylon, 1% Spandex — the score is a weighted average based on each material's proportion.
D (40-54): Below-average material composition — weak on durability or comfort.
Below average — consider alternatives
This fabric scores low on quality. It may pill, wear out quickly, or not feel great against skin. And when it does wear out, it'll sit in a landfill for decades. Look for higher-rated options.
Overpriced for the fabric
$40Below-typical fabric quality at an above-median price — you may be paying for the label, not the material.
$0.75 per quality point Category median: $20 · grade C
Fabric value only — compares material quality to price vs other socks. Construction, fit, and brand aren't measured.
02Breakdown
Composition
47% Cotton, 47% Acrylic, 5% Nylon, 1% Spandex
Mostly natural with stretch
Fabric details
Made in Japan
Added Apr 6, 2026 · Data last updated Apr 6, 2026
Sustainability is scored separately — see the Eco Rating below.
⚠️
Synthetic fabrics can contain BPA, which mimics estrogen. Studies have found BPA transferring to skin through sweat contact.
🌍
This fabric will take 200+ years to decompose. That means a shirt you buy today will still exist in the year 2226.
🧺
Dryer heat destroys spandex/elastane over time. Your leggings and stretchy clothes will last 2x longer if you skip the dryer.
03Network
Performance
spec sheet- Assembled in
- Japan
Cost per wear
rough estimate$1.14/wear · 35 expected wears
Reasonable cost-per-wear
How we got there
Base for Socks: 50 expected wears.
× 0.70 for Cotton (low-durability fiber, durability 54).
= 35 expected wears. $40 ÷ 35 ≈ $1.14/wear.
Missing GSM — this is a category-level estimate, not garment-specific. Expect ±30% variance.
Real life is messier than a formula: how often you wash, how you wash, whether you wear it inside-out, dry on low — all of it shifts the number. This is the ceiling under reasonable care.
Care Guide
Decode symbolsWash
cold (30°C)
Bleach
Do not bleach
Dry
flat dry
Iron
Best For
👕Everyday Casual
GoodGood comfort (60) and care ease (78) for casual wear
Better Alternatives
Higher-rated socks products — each card shows how much better this alt scores vs your current product.
04Tradeoffs
Health Impact
Microplastic shedding · skin-contact synthetic load · likely chemical treatments
D51/100
High health impact — significant synthetic content or likely chemical treatments. For frequent skin-contact wear, consider a natural-fiber alternative.
Microplastics HIGH
730,000 fibers/wash
Skin contact HIGH
53% synthetic
Chemicals LOW
No flags
53% synthetic (primarily acrylic). High microplastic shedding risk. Every wash releases hundreds of thousands of plastic fibers into waterways.
$40 for a fabric that's 53% synthetic (plastic-based).
Biodegradability
Not BiodegradableMaterials will persist in the environment for decades.
What this score doesn't measure
- ×Fiber grade. Staple length, micronaire, strength. "100% cotton" could be short-staple upland or long-staple Pima — same label, very different fabric.
- ×Yarn processing. Singles count, ply (single vs two-ply), spinning method (open-end vs ring-spun vs compact), mercerization. Invisible from any label.
- ×Knit / weave structure. Single jersey vs interlock, knit tightness. A loose knit pills; a tight knit lasts.
- ×Fabric weight (GSM). One construction signal among several — and high GSM can come from loose cheap yarn just as easily as from fine tight yarn. We have it for blank manufacturers, rarely for retail.
- ×Pre-shrink processing. Sanforized cotton shrinks ~1%; non-sanforized can shrink up to 10%. Not visible from the composition tag.
- ×Construction quality. Stitch density (SPI), seam types, collar geometry, manufacturing tolerances (AQL). These often matter more than the fiber itself.
- ×Specific chemical loads. Health Impact flags "likely PFAS / possible formaldehyde" from composition × category — we don't lab-test individual SKUs.
We rate the fabric, not the garment. Composition is the floor of what you're guaranteed to be getting — most shoppers don't have that.
05Action
