FabricIQ
Reading the label…
C
58/100
01Verdict
Well-made, but plastic on skin.
Best for Outerwear or layers — not for direct skin contact.
Material C · 58Health F · 13Eco · 19Label · high142 gsm
Why this material grade?
This product scored 58/100 on the material-quality rubric (durability, comfort, breathability, warmth, moisture-wicking, care-ease), based on its composition of 85% Nylon, 15% Spandex. Sustainability is scored separately as the Eco Rating. Blended from 85% Nylon, 15% Spandex — the score is a weighted average based on each material's proportion.
C (55-69): Average material composition — typical blend, reasonable for everyday wear.
Average quality, high synthetic content
Decent for everyday wear, but the synthetic content means microplastic shedding and it won't biodegrade. Consider natural alternatives for your next purchase.
Overpriced for the fabric
$108Below-typical fabric quality at an above-median price — you may be paying for the label, not the material.
$1.86 per quality pointCategory median: $88 · grade C
Fabric value only — compares material quality to price vs other shorts. Construction, fit, and brand aren't measured.
02Breakdown
Composition
85% Nylon, 15% Spandex
Plastic-based — sheds microplastics in wash
Fabric details
eVent™Bonded
142 g/m²
Likely chemical finishes
⚠ Durable water repellent · PFAS
Stated on the product page — not lab-tested. Not medical advice.
Care (from the label)
Machine wash cold
Added Jun 7, 2026 · Data last updated Jun 7, 2026
Sustainability is scored separately — see the Eco Rating below.
⚠️
Synthetic fabrics can contain BPA, which mimics estrogen. Studies have found BPA transferring to skin through sweat contact.
🌍
This fabric will take 200+ years to decompose. That means a shirt you buy today will still exist in the year 2226.
🧺
Dryer heat destroys spandex/elastane over time. Your leggings and stretchy clothes will last 2x longer if you skip the dryer.
03Network
Performance
spec sheet- Fabric weight
- 142 g/m²
Mid-weight
Cost per wear
estimated81¢/wear · 133 expected wears
Reasonable cost-per-wear
How we got there
Base for Shorts: 120 expected wears.
× 0.85 for 142 g/m² (mid-weight).
× 1.30 for Nylon (high-durability fiber, durability 86).
= 133 expected wears. $108 ÷ 133 ≈ 81¢/wear.
Real life is messier than a formula: how often you wash, how you wash, whether you wear it inside-out, dry on low — all of it shifts the number. This is the ceiling under reasonable care.
Care Guide
Decode symbolsWash
cold (30°C)
Bleach
Do not bleach
Dry
line dry
Iron
Best For
👔Formal/Office
GoodGood durability (86) and comfort (53) for office wear
Better Alternatives
Higher-rated shorts products — each card shows how much better this alt scores vs your current product.
04Tradeoffs
Health Impact
Microplastic shedding · skin-contact synthetic load · likely chemical treatments
F13/100
High health impact — significant synthetic content or likely chemical treatments. For frequent skin-contact wear, consider a natural-fiber alternative.
MicroplasticsHIGH
500,000 fibers/wash
Skin contactHIGH
100% synthetic
ChemicalsHIGH
PFAS
- PFAS (likely): "Durable water repellent" stated on the product page — observed, not inferred.
Biodegradability
Not BiodegradableMaterials will persist in the environment for decades.
What this score doesn't measure
- ×Fiber grade. Staple length, micronaire, strength. "100% cotton" could be short-staple upland or long-staple Pima — same label, very different fabric.
- ×Yarn processing. Singles count, ply (single vs two-ply), spinning method (open-end vs ring-spun vs compact), mercerization. Invisible from any label.
- ×Knit / weave structure. Single jersey vs interlock, knit tightness. A loose knit pills; a tight knit lasts.
- ×Fabric weight (GSM). One construction signal among several — and high GSM can come from loose cheap yarn just as easily as from fine tight yarn. We have it for blank manufacturers, rarely for retail.
- ×Pre-shrink processing. Sanforized cotton shrinks ~1%; non-sanforized can shrink up to 10%. Not visible from the composition tag.
- ×Construction quality. Stitch density (SPI), seam types, collar geometry, manufacturing tolerances (AQL). These often matter more than the fiber itself.
- ×Specific chemical loads. Health Impact flags "likely PFAS / possible formaldehyde" from composition × category — we don't lab-test individual SKUs.
We rate the fabric, not the garment. Composition is the floor of what you're guaranteed to be getting — most shoppers don't have that.
05Action
