FabricIQ
Reading the label…
D
52/100
01Verdict
Falls short on every axis — flimsy, synthetic-heavy, and rough on the environment.
Best for Skip if you have other options.
Material D · 52Health F · 13Eco · 20Label · highMade in China
Why this material grade?
This product scored 52/100 on the material-quality rubric (durability, comfort, breathability, warmth, moisture-wicking, care-ease), based on its composition of 100% Polyester. Sustainability is scored separately as the Eco Rating.
D (40-54): Below-average material composition — weak on durability or comfort.
Below average — consider alternatives
This fabric scores low on quality. It may pill, wear out quickly, or not feel great against skin. And when it does wear out, it'll sit in a landfill for decades. Look for higher-rated options.
Budget pick
$78Below-typical fabric quality, but cheaper than the category median.
$1.50 per quality pointCategory median: $88 · grade C
Fabric value only — compares material quality to price vs other shorts. Construction, fit, and brand aren't measured.
02Breakdown
Composition
100% Polyester
Plastic-based — sheds microplastics in wash
Fabric details
eVent™✓ bluesign®DWRMechanical Stretch
Made in China
Likely chemical finishes
⚠ Antimicrobial biocide · biocide
Stated on the product page — not lab-tested. Not medical advice.
Added Jun 7, 2026 · Data last updated Jun 7, 2026
Sustainability is scored separately — see the Eco Rating below.
🔬
Every wash of synthetic fabric releases up to 700,000 microplastic fibers into waterways. Use a Guppyfriend bag to catch them.
🌍
This fabric will take 200+ years to decompose. That means a shirt you buy today will still exist in the year 2226.
⚠️
Synthetic fabrics can contain BPA, which mimics estrogen. Studies have found BPA transferring to skin through sweat contact.
03Network
Performance
spec sheet- Assembled in
- China
Cost per wear
rough estimate50¢/wear · 156 expected wears
Reasonable cost-per-wear
How we got there
Base for Shorts: 120 expected wears.
× 1.30 for Polyester (high-durability fiber, durability 85).
= 156 expected wears. $78 ÷ 156 ≈ 50¢/wear.
Missing GSM — this is a category-level estimate, not garment-specific. Expect ±30% variance.
Real life is messier than a formula: how often you wash, how you wash, whether you wear it inside-out, dry on low — all of it shifts the number. This is the ceiling under reasonable care.
Care Guide
Decode symbolsWash
warm (40°C)
Bleach
Do not bleach
Dry
tumble low
Better Alternatives
Higher-rated shorts products — each card shows how much better this alt scores vs your current product.
04Tradeoffs
Health Impact
Microplastic shedding · skin-contact synthetic load · likely chemical treatments
F13/100
High health impact — significant synthetic content or likely chemical treatments. For frequent skin-contact wear, consider a natural-fiber alternative.
MicroplasticsHIGH
700,000 fibers/wash
Skin contactHIGH
100% synthetic
ChemicalsHIGH
Antimony, Biocide
- Antimony (trace): Virgin polyester contains trace antimony from PET production. Recycled polyester reduces but does not eliminate it.
- Biocide (likely): "Antimicrobial biocide" stated on the product page — observed, not inferred.
Biodegradability
Not BiodegradableMaterials will persist in the environment for decades.
What this score doesn't measure
- ×Fiber grade. Staple length, micronaire, strength. "100% cotton" could be short-staple upland or long-staple Pima — same label, very different fabric.
- ×Yarn processing. Singles count, ply (single vs two-ply), spinning method (open-end vs ring-spun vs compact), mercerization. Invisible from any label.
- ×Knit / weave structure. Single jersey vs interlock, knit tightness. A loose knit pills; a tight knit lasts.
- ×Fabric weight (GSM). One construction signal among several — and high GSM can come from loose cheap yarn just as easily as from fine tight yarn. We have it for blank manufacturers, rarely for retail.
- ×Pre-shrink processing. Sanforized cotton shrinks ~1%; non-sanforized can shrink up to 10%. Not visible from the composition tag.
- ×Construction quality. Stitch density (SPI), seam types, collar geometry, manufacturing tolerances (AQL). These often matter more than the fiber itself.
- ×Specific chemical loads. Health Impact flags "likely PFAS / possible formaldehyde" from composition × category — we don't lab-test individual SKUs.
We rate the fabric, not the garment. Composition is the floor of what you're guaranteed to be getting — most shoppers don't have that.
05Action
