FabricIQ
Reading the label…
01Verdict
Well-made, but plastic on skin.
Best for Outerwear or layers — not for direct skin contact.
Material C · 63Health D · 50Eco · 56Label · low
Why this material grade?
This product scored 63/100 on the material-quality rubric (durability, comfort, breathability, warmth, moisture-wicking, care-ease), based on its composition of 38% Viscose, 38% Organic Cotton, 19% Recycled Polyester, 5% Elastane. Sustainability is scored separately as the Eco Rating. Blended from 38% Rayon, 38% Organic Cotton, 19% Recycled Polyester, 5% Spandex — the score is a weighted average based on each material's proportion.
C (55-69): Average material composition — typical blend, reasonable for everyday wear.
Average quality, high synthetic content
Decent for everyday wear, but the synthetic content means microplastic shedding and it won't biodegrade. Consider natural alternatives for your next purchase.
Budget pick
$90Below-typical fabric quality, but cheaper than the category median.
$1.43 per quality point Category median: $113 · grade C
Fabric value only — compares material quality to price vs other sweaters. Construction, fit, and brand aren't measured.
02Breakdown
Composition
38% Viscose, 38% Organic Cotton, 19% Recycled Polyester, 5% Elastane
Mostly natural with stretch
Fabric details
eVent™
Jersey construction
Likely chemical finishes
⚠ Easy-care resin · formaldehyde
Stated on the product page — not lab-tested. Not medical advice.
Care (from the label)
Machine wash warm
Sustainability is scored separately — see the Eco Rating below.
🔬
Every wash of synthetic fabric releases up to 700,000 microplastic fibers into waterways. Use a Guppyfriend bag to catch them.
🌍
This fabric will take 200+ years to decompose. That means a shirt you buy today will still exist in the year 2226.
🧺
Dryer heat destroys spandex/elastane over time. Your leggings and stretchy clothes will last 2x longer if you skip the dryer.
03Network
Performance
spec sheet- Construction
- Jersey
Knit — soft, stretchy
Cost per wear
rough estimate$1.29/wear · 70 expected wears
Reasonable cost-per-wear
How we got there
Base for Sweaters: 100 expected wears.
× 0.70 for Rayon (low-durability fiber, durability 55).
= 70 expected wears. $90 ÷ 70 ≈ $1.29/wear.
Missing GSM — this is a category-level estimate, not garment-specific. Expect ±30% variance.
Real life is messier than a formula: how often you wash, how you wash, whether you wear it inside-out, dry on low — all of it shifts the number. This is the ceiling under reasonable care.
Care Guide
Decode symbolsWash
cold (30°C)
Bleach
Do not bleach
Dry
line dry
Iron
Best For
👕Everyday Casual
GoodGood comfort (72) and care ease (62) for casual wear
😴Sleepwear
GoodGood comfort (72) and breathability (67) for sleeping
Better Alternatives
Higher-rated sweaters products — each card shows how much better this alt scores vs your current product.
04Tradeoffs
Health Impact
Microplastic shedding · skin-contact synthetic load · likely chemical treatments
D50/100
High health impact — significant synthetic content or likely chemical treatments. For frequent skin-contact wear, consider a natural-fiber alternative.
Microplastics MEDIUM
600,000 fibers/wash
Skin contact LOW
24% synthetic
Chemicals HIGH
Formaldehyde
- Formaldehyde (likely): "Easy-care resin" stated on the product page — observed, not inferred.
Biodegradability
Not BiodegradableMaterials will persist in the environment for decades.
Label Confidence
LOWLabel confidence low — multiple signals suggest the composition may be incomplete, vague, or hard to verify. Treat scores as directional.
- ⚠Organic cotton claim without explicit certification (GOTS, OCS). Check brand's certification disclosures separately.
- ⚠Recycled-fiber claim without explicit certification (GRS, RCS). Chain-of-custody for recycled materials is hard to verify without one.
What this score doesn't measure
- ×Fiber grade. Staple length, micronaire, strength. "100% cotton" could be short-staple upland or long-staple Pima — same label, very different fabric.
- ×Yarn processing. Singles count, ply (single vs two-ply), spinning method (open-end vs ring-spun vs compact), mercerization. Invisible from any label.
- ×Knit / weave structure. Single jersey vs interlock, knit tightness. A loose knit pills; a tight knit lasts.
- ×Fabric weight (GSM). One construction signal among several — and high GSM can come from loose cheap yarn just as easily as from fine tight yarn. We have it for blank manufacturers, rarely for retail.
- ×Pre-shrink processing. Sanforized cotton shrinks ~1%; non-sanforized can shrink up to 10%. Not visible from the composition tag.
- ×Construction quality. Stitch density (SPI), seam types, collar geometry, manufacturing tolerances (AQL). These often matter more than the fiber itself.
- ×Specific chemical loads. Health Impact flags "likely PFAS / possible formaldehyde" from composition × category — we don't lab-test individual SKUs.
We rate the fabric, not the garment. Composition is the floor of what you're guaranteed to be getting — most shoppers don't have that.
05Action
